Passer au contenu
Free Shipping on Orders Over $35 🎄 Save 15% on Orders Over $100
Free Shipping on Orders Over $35 🎄 Save 15% on Orders Over $100
Make resin coasters yourself

Make resin coasters yourself

Make resin coasters yourself

In this article we will show you step by step how you can make individual coasters, with our JDiction products. With these resin coasters you can conjure up a special home accessory or a gift for your loved ones in no time at all. What are you waiting for?

You need:

  • JDiction Epoxy Resin (1:1 Mix Ratio)
  • JDiction Resin Colorant
  • Measuring Cups
  • Mixing cup
  • Stir bars
  • Gloves
  • Coasters silicone mold
  • Glitter or other scatter decorations
  • Acrylic colored pencils for the edges

Resin coasters DIY - This is how it works:


Preparation:
Have all the materials ready. Note that we recommend for your materials and workspace to be between 72-85°F.

Step 1: Mix our JDiction Epoxy Resin according to the instructions in a ratio of 1: 1 by volume. Stir well until no more streaks can be seen.

Step 2: For a transparent result, pour some resin just below the edge of the mold. Divide the remaining epoxy into different mixing containers. Mix the resin portions with color and add metallic pigments according to your wishes.

Tips: Please do not add more than 6% of the total combined volume of resin and hardener ( eg. 50ml resin + 50 ml hardener = 100 ml total would require no more than 6 ml of colorant. )

Step 3: After 24 hours the resin has hardened and you can take the pendant out of the mold (if using UV resin, have to cure with under the UV lamp or sunlight).
If you want, you can now set off the edges of the geodes with acrylic paint pens to finalize them.

Make resin coasters yourselfMake resin coasters yourself

Article précédent 7 Ways to Finish the Edges of Your JDiction Resin Coated Artwork
Articles suivant Make resin tealight holder yourself

Laisser un commentaire

* Champs obligatoires